Product Overview
Engineered specifically for two-wheelers operating in harsh outdoor environments, this compact tracker combines LTE Cat-1 cellular connectivity with multi-constellation GNSS positioning inside an IP67-sealed, UV-resistant ABS housing, operating across a 9V to 90V DC input range with ultra-low sleep current consumption below 2 mA to eliminate vehicle battery drain during extended idle periods.
Technical Specifications
|
Parameter |
Specification |
|
Positioning |
GPS, GLONASS, Galileo, BDS; CEP < 2.5m; Tracking: -162 dBm |
|
Cellular Bands |
LTE-FDD B1-B8, B12, B13, B18-B20, B28, B66; GSM fallback |
|
Input Voltage |
9V to 90V DC with surge protection up to 100V |
|
Power Consumption |
Active: 35 mA (12V); Sleep: < 2 mA (12V); Deep Sleep: < 50 µA |
|
Backup Battery |
3.7V 170mAh rechargeable Li-polymer |
|
Ingress Protection |
IP67 dust and water resistance (ISO 20653) |
|
Temperature Range |
Operating: -20°C to +70°C; Storage: -40°C to +85°C |
|
Dimensions & Weight |
84 mm × 40 mm × 18 mm; 120 g |
|
I/O Interfaces |
1x ACC Ignition Input, 1x Digital Output, 1x Analog Input |
Core Hardware Features
Dual-Layer Sealing
Ultrasonic welded ABS enclosure with integrated silicone gaskets prevents moisture intrusion during heavy rainstorms and short-term water immersion (IP67 certified).
Motion-Triggered Sleep
An onboard 3-axis accelerometer detects vehicle stillness and shifts the device into a low-power sleep state to preserve the starting battery.
Ignition Monitoring
Dedicated ACC input lines track engine operation states in real time to generate accurate trip logs and idle duration reports.
Engine Immobilization
Integrated digital output triggers external 12V/24V relays to safely cut fuel or ignition circuits upon verified theft commands.
Internal Antenna Array
High-gain internal patch antennas for cellular and GNSS signals eliminate external cable vulnerabilities and speed up deployment.
Installation Guidelines
Mounting Location
Secure the unit flat under plastic fairings or seats with the top side facing skyward, avoiding direct metallic shielding.
Power Connection
Wire the positive lead directly to the main battery terminal through an inline 2A fuse to maintain stable input during engine cranking.
Vibration Dampening
Apply industrial double-sided foam tape and nylon zip ties to isolate the enclosure from high-frequency engine vibration.
Harness Routing
Bundle the wiring loom away from exhaust headers, moving swingarms, and sharp metal frame edges.
Vehicle Compatibility
Standard Motorcycles
Fits 12V internal combustion engine bikes, scooters, and touring motorcycles without electrical modifications.
Electric Two-Wheelers
Connects directly to 48V, 60V, and 72V traction battery systems on electric scooters without external step-down converters.
Delivery Fleets
Integrates into commercial courier fleets requiring continuous, reliable telemetry across diverse vehicle displacements.
Security and Tamper Detection
Main Power Cut Alert
Triggers instant emergency transmissions using the backup battery if power wires are severed.
Tow-Away Detection
Identifies unauthorized movement while the ignition remains off, alerting operators within seconds.
Geofence Boundaries
Sends automated notifications when a vehicle crosses pre-loaded geographic perimeter limits.
Shock Monitoring
Filters road vibration during normal transit while flagging sudden impacts on parked vehicles.
OEM and Hardware Customization
Firmware Protocols
Supports GT06, JT808, and native MQTT/HTTP formats; custom payload compiling within 5 working days.
Enclosure Branding
Provides laser-engraved serial numbers, corporate logos, and custom-colored ABS housings at 2,000-unit thresholds.
Cable Harness Options
Adjustable standard 1.2-meter harness lengths with optional waterproof Molex or AMP connector terminations.
Sensor Expansion
Optional RS232 or BLE 5.0 module integration for external fuel sensors and wireless driver IDs.
Packaging and Logistics
Carton Specifications
Packaged 50 units per master carton; total weight 7.5 kg; dimensions 42 cm × 32 cm × 22 cm; individually polybagged with IMEI barcode labels.
Box Contents
Includes main GPS tracker, 4-pin power harness, mounting pad, and basic wiring instruction sheet. (External relay available as an optional accessory).
Global Compliance & Lead Time
Certified under CE, FCC, and RoHS standards; supports air, ocean, and express shipping with complete export documentation. Sample orders dispatched within 3 working days; mass production lead time is 15-20 days.
Frequently Asked Questions
Q: How does the tracker prevent motorcycle battery drainage?
A: The device enters a low-power mode drawing under 2 mA when the accelerometer registers no movement, waking instantly when motion resumes.
Q: Can the device integrate with custom fleet tracking software?
A: Yes, complete protocol documentation, SDK/API parsing support, and sample code are provided for server integration.
Q: What is the minimum order quantity for custom branding?
A: Standard units require an MOQ of 100 pieces, while customized logos, wiring, and firmware start at 500 to 2,000 pieces.
Q: Is the device resistant to high-pressure cleaning?
A: The IP67 rating protects internal electronics against dust and water immersion up to 1 meter for 30 minutes. Direct high-pressure waterjet cleaning onto the device enclosure should be avoided.
Q: What is the sample and mass production lead time?
A: Sample orders are shipped within 3 working days upon confirmation, while mass production orders (500+ units) typically take 15 to 20 business days.
Hot Tags: waterproof gps tracker for motorcycles, China waterproof gps tracker for motorcycles manufacturers, suppliers, factory
