4G GPS Tracker For Motorcycles

This hardware solution integrates 4G LTE cellular modules with high-sensitivity GNSS chipsets to provide continuous position reporting, harsh driving detection, and remote power cutoff for motorcycles, scooters, and electric two-wheelers. Built for commercial fleet operators and security service providers, the unit supports standard communication protocols for seamless integration into existing tracking software platforms via open API and AT command documentation.

Remote Engine Cutoff: Interfaces with an external 12V relay to cut fuel or ignition circuitry remotely via server command or mobile application trigger.

Vibration and Tamper Alert: Built-in 3-axis accelerometer detects unauthorized towing, impact, or vibration, instantly transmitting alarm packets.

Power Disconnection Alarm: Generates immediate alerts upon the unauthorized removal or cutting of the main vehicle power supply.

Ignition Status Detection: Monitors ACC ignition line state to distinguish between idling, engine-on movement, and parked status.

OTA Firmware Updates: Supports remote over-the-air firmware flashing for parameter configuration and protocol adjustments.

Placement Guidelines: Mount the unit horizontally with the top face oriented upward beneath non-metallic fairings, under the seat, or near the headstock to maximize GNSS satellite line-of-sight.

Wiring Harness Connection: Connect the red wire to positive 9V–90V DC, black to chassis ground, orange to ACC ignition detection, and yellow to the external relay coil.

Electrical Insulation: Ensure proper insulation of unused wires using heat-shrink tubing to prevent short circuits in wet operating conditions.

Standby Power Control: Standby current draw measures below 5mA in sleep mode, preventing starter battery depletion during extended parking periods.

Internal Combustion Engines: Fully compatible with 12V, 24V, and 48V fuel-powered motorcycles, scooters, and ATVs.

Electric Two-Wheelers: Supports direct integration into 48V, 60V, and 72V electric scooters and delivery motorcycles without requiring step-down DC converters.

Relay Switching Capacity: External relay supports up to 40A switching capacity, matching standard motorcycle ignition and fuel pump circuits.

Platform Protocol: Communicates via standard binary and ASCII protocols, pre-integrated with major GPS tracking server platforms.

Hardware Modifications: PCB redesigns available for minimum order quantities of 1,000 units, including custom wiring harness lengths, specialized connectors, or integrated CAN bus readers.

Firmware Adaptation: Protocol customization to match proprietary server data structures, custom heartbeat intervals, and geo-fence threshold adjustments for orders exceeding 500 units.

Branding and Enclosure: Laser-engraved serial numbers, custom logo silk-screening on the casing, and customized retail box packaging starting from 500 units.

SIM Card Integration: Optional pre-installed global IoT M2M SIM cards or embedded eSIM chips configured for regional cellular carriers upon request.

Standard Unit Packaging: Individual retail box containing the GPS tracker unit, 4-pin wiring harness, 12V relay, and installation manual.

Master Carton Specifications: 100 units per master carton; carton dimensions: 45cm × 35cm × 30cm; gross weight: 9.5 kg.

Shipping Compliance: Lithium backup batteries comply with UN38.3 transport safety regulations for air and ocean freight.

Lead Time: Standard production lead time is 7 to 15 business days for orders under 5,000 units; expedited manufacturing schedules available for volume contracts.

Hot Tags: 4g gps tracker for motorcycles, China 4g gps tracker for motorcycles manufacturers, suppliers, factory